Operating instructions

Special applications and functions

Now load the selected number of reference pieces.

PCS

Then briefly press the «t»» key. As long as the horizontal dashes are displayed,

the balance is calculating the reference weight.

Note

If you do not press a key for 45 seconds, the balance returns to the weighing

mode.

After your balance has determined the reference weight, it shows the correct piece

number and is now ready for piece counting.

550.68 g

0.55068

You can use the «!£*» key at any time to switch the display between the piece

number display, weighing unit 1 and weighing unit 2.

Note

The current set weight remains stored unti I it is redetermined or the power supply

of the balance is interrupted.

—

APW

Out

- PIECE

of:

Net

COUNTING

.19990000

100

20.00

PCS

If a printer is connected to your balance, the reference weight, the reference piece

number, the total piece count as well as the net weight of the total piece count

are printed out.

PCS

Note

If a printer is attached, you can start a new piece counting with the «->0/T<-»

key.