Operating instructions

Special applications and functions

5 Special applications and functions

Your balance can do more than just weigh. Built-in applications and functions expand the possibilities of your balance

and facilitate your daily work. The following Sections will acquaint you with these applications and functions.

5.1 Piece counting

Piece counting presupposes that you have preselected the function "F count" ("PCS" or "Stk") in the menu (see

Section 4.6).

Load the empty container.

long

nnn

uuu Q

PCS

set -iQ-

\ i /

set -10-

/ I \

PCS

set-^o-

/1 \

Press the «->0/T<-» key to tare the balance.

Your balance now needs the weight of a reference piece number. Press and

hold the «F» key until you are prompted to load the reference pieces.

Your balance suggest "10" as reference piece number. You can accept this

suggestion or select one of the the available reference piece numbers (20, 30,

50, 100 or 5 pieces) by briefly pressing the «!£3» key.

Note

We advise you to select a reference piece number as large as possible as the

balance determines the average weight per piece and saves it as the reference

weight. As it is seldom the case that all pieces have the exactly the same weight,

the accuracy of the reference weight increases with increasing reference piece

number.