Operating instructions

The menu
34
03.10.97
T TCT
16:49:06
METTLER TOLEDO
Balance
Type:
SNR:
SW-Ver. :
Cal:
Function:
Vibr.:
Wghpro.:
Repro.:
Unit 1:
Unit 2:
A.Zero:
A.off:
Start:
Icons:
Output:
Baud:
Bit:
Parity:
Handshake
PG2002-S
1113170358
1.74 1.30
FACT
none
2
2
good
g
oz
on
-
Qu. Start
on
Printer
2400
7
even
:off
The record shown opposite is a specimen which can be printed out e.g. with the
METTLER TOLEDO LC-P45 Printer. Depending on the selected settings and the
selected connection with LocalCAN or RS232 interface, the representation may
differ from the example shown.
4.23 Canceling secure function
Stepl
secured
Step 2
OPEn
If "secure" is selected in the menu, "Secured" appears when it is reentered
(initiated by the menu key). If you do not press the «!£3» key for more than 3
seconds, the balance automatically returns to the weighing mode (menu
remains blocked).
After the «!£3» key has been pressed, "Open" appears. Confirm this within
3 seconds by pressing and holding the menu key, entry into the menu is then
possible again (menu open).
Note
The release applies to "SECUrE 1" and "SECUrE 2".
Menu
Step 3
long