Operating instructions

The menu
33
4.21 Setting handshake
In this menu option the data transfer can be matched to various serial receivers.
The following settings are available:
No handshake
h'5
h'5
MS
off \
\
\
Soft \
HRrd \
Software handshake (XON/XOFF)
Hardware handshake
Note
If you have selected this setting, the attached peripheral unit must be switched
on. If the peripheral unit is switched off, the balance will be blocked.
4.22 Printing out or saving menu settings
In this menu option you have the possibility to save all menu settings. You can also print out all current settings of the menu
assuming your balance is connected to a printer.
As soon as you save your settings and quit the menu, all settings defined in the
menu are recorded on the attached printer.
With "Secure 1" you can protect the menu settings against inadvertent changes.
With "Secure 2" you can protect both the menu settings and also the [™"_ I key,
which triggers the adjustment function or lowers the readability of the display,
against inadvertent changes.
Note
If the adjustmentfunction "FACT" is set in the menu option, the PG-S balance also
automatically performs an internal adjustment in the setting "Secure 2".
i 1
5E
SE
5fc
CUr
CUr
\