Operating instructions

The menu
5. Rii
5. Ruto
5. Cent
The current value will be transferred after triggering of the Print/Transfer com-
mand.
Only stable values will be automatically transferred after every weight change.
All values will be automatically transferred.
Note
The menu option "Data transfer mode" appears only if "HoSt" has been selected
in the menu option "Selecting peripheral device" (see also Section 8.1).
4.18 Selecting data transfer format
5. 5 IC5
With this setting the data transfer formats described in MT-SICS are used. You will
find the description in the enclosed description of the operating instructions
(Reference manual MT-SICS).
With this setting the data transfer formats of the PM balances are used.
Note
If you wish to use other data transfer formats of the PM balances with your
PG-S balance, please use the optional R/G-M emulation software cassette which
emulates all interface commands of the PM balances (see Section 7.3).
The interface is unidirectional. Incoming interface commands in the setting
"S. PM" are not processed further.
The menu option "Selecting data transfer format" appears only if the setting
"S. oFF" has not been selected in the menu option "Selecting data transfer mode"
(see also Section 8.1).