Operating instructions

The menu
25
Fine addition
This setting is suitable for the weighing in of fine powders, small amounts of
liquids, etc.
4.9 Selecting repeatability
In the left lower corner of the display you will find the circular symbol of the stability detector. As soon as the weighing result
is within specified limit values over a certain time interval, the weighing result is considered stable and the symbol for the
stability detector fades. With the setting for the repeatability ("Repro-Set"), you determine the time interval over which the
result must lie within the limit values for it to be considered stable. The better the repeatability, the longer the weighing
process lasts.
The following settings are available:
uood
Good repeatability
The weight display is released as stable quickly, this is the factory setting.
bEttE
r
Very good repeatability
Slower release until stable weight display.
test
Best possible repeatability
Stable weight display is not released until several seconds without change.
Std
Normal repeatability
The weight display is released as stable very quickly, in other words:
The display for the stability detector fades very quickly.