Operating instructions

Weighing made simple

3.7 Switching weighing units

Your balance can display the weighing result in two different weighing units. How you preselect the two weighing units

is described in Sections 4.10 and 4.11.

You can switch between the two weighing units at a keystroke:

: n 3 c n

iu.CDu g

The balance shows the result in weighing unit 1.

Press the «!£3» key briefly.

The balance shows the result in weighing unit 2. By pressing the «!£3» key

again, you can return to weighing unit 1.

Notes

If an additional unit (e.g. "

%" or "PCS") is displayed when switching between the

two weighing units, you have preselected a function in the menu. You will find

further information on the functions in Sections 4.6 and 5.1 through 5.4.

The following weighing units are set in the factory:

For PG-S balances with 1 mg readability

Weighing unit 1: g (grams)

Weighing unit 2: mg (milligrams)

For PG-S balances with lOmg readability

Weighing unit 1 : g (grams)

Weighing unit 2 : g (grams)

You will find a table of the conversion factors between the various weighing units

in Section 8.2.

3.8 Printing out the weighing result and transferring data

If your balance is connected to a printer via the RS232C interface or via the LocalCAN universal interface, you can transfer

current weighing results, identifications and other data to the attached device with a single keystroke.

Press the «Lr»» key briefly. As soon as the weighing result is stable, the status indicator of the readability fades and the

result is transferred to the attached device.

You will find additional information on the attachment of a printer in Sections 6.4

and 6.5 and in the documentation accompanying your printer.