Operating instructions

18 Application "Diagnostics"
The "Diagnostics" application allows you to carry out predefined diagnostics tests and to
view or print predefined sets of balance information. This diagnostics tool helps you find
errors faster and more efficiently.
Requirement: A printer or a PC is connected to the balance for showing the results.
a) Activate "ADVANCE." menu. (See section menu operation)
b) Activate function "DIAGNOS." by pressing « ».
c) Use « » to select appropriate tests.
18.1 Repeatability Test
The repeatability test allows you to repeat tests with internal weight for a given number of times.
Note: On models with internal weights only.
a) Press « » to activate repeatability test "REPEAT.T". "R.TST. 10" appears on the Display.
b) Enter the number of times (blinking) by pressing «+» or «–». Possible values are 5, 10 (default), 20, 50,
100 times.
c) Press «
» to start the test. The message "RUNNING REPEAT TEST" is displayed till the tests are complet
ed.
d) Press « » to print the test information..
e) Press « » to scroll forward through the displayed list.
f) Press «C» to cancel the test procedure. The balance will return to the topic "DIAGNOS.".
Sample Information Displayed:
Displayed for 0.5 s Display
"S DEV" * 0.004 g
"MAX.TEMP" 21.2 °C
"MIN.TEMP" 21.0 °C
"AVG.TEMP" 21.1 °C
"TOT.TIME" 00:01:26
66 Application "Diagnostics"