Operating instructions

Sample printout:

---- Density Solid -----

18.Mar 2010 20:14

Balance Type ML204

SNR 1234567890

------------------------

ID: ................

Liquid:

H-2-O 0.99822 g/cm3

Temp. 20.0 °C

Weight in air:

60.0020 g

Weight in liquid:

49.9997 g

Volume of solid:

1.625 cm3

Density: 5.988 g/cm3

===========

Signature

........................

------------------------

16.2 Density Determination of Liquids

Requirement: The method "LIQUID" is set.

010.0000

012.0000

Setting the displacement volume of your sinker

Press « » to confirm the default value of 10.0 cm

or change it if

needed:

a) Press « » to select a digit. The selected digit is blinking.

b) For changing digits, press «+» to scroll up or «-» to scroll down

c) Press « » to confirm the selected value.

Note: If without any key press within 60 seconds or by pressing «C», the balance returns to the previous active

application.

On completion of the settings, your balance is ready for performing the density determination of liquids.

Note: Taring the balance is possible at any time.

PRESS EN

The balance prompts you: "PRESS ENTER TO START".

Press « » to start.

WEIGH IN AIR

The balance prompts you to weigh the sinker in air "WEIGH IN AIR".

a) Position the sinker.

b) Press « » to initiate the measurement.

Application "Density"