Operating instructions

C
0.010
1000.02
g
0.000
C
Weighing procedure
a) Press « » to zero/tare.
b) Load sample weight on weighing pan.
c) Read the result. The appropriate calculation is then made using
the weight of sample and the selected factor, the result being dis
played with the selected display step.
Note:No units are displayed. To avoid a division by zero, the fac
tor division is not calculated at zero.
d) Unload sample weight.
Toggling between displaying the calculated value and the measured
weight:
You can use the «
» key to toggle between the calculated Value,
weight value "UNIT 1", "RECALL" value (if selected) and weight value
"UNIT 2" (if different from "UNIT 1").
56
Application "Division Factor Weighing"