Operating instructions

9810

1000.02

Weighing procedure

a) Press « » to zero/tare.

b) Load sample weight on weighing pan.

c) Read the result. The appropriate calculation is then made using

the weight of sample and the selected factor, the result being dis

played with the selected display step.

Note: No units are displayed.

d) Unload sample weight.

Toggling between displaying the calculated value and the measured

weight:

You can use the «

» key to toggle between the calculated Value,

weight value "UNIT 1", "RECALL" value (if selected) and weight value

"UNIT 2" (if different from "UNIT 1").

Application "Multiplication Factor Weighing"