Operating instructions

7 Application "Piece Counting"
The "Piece Counting" application allows you to determine the number of pieces put on the
weighing pan.
Requirement: The function "COUNT" must be assigned to the «F» key (see advanced menu
topic "ASSIGN:F", factory setting).
COUNT
Activate function "COUNT" by pressing and holding the «F» key.
D
A
B C
Piece Counting first requires the setting of a reference weight,
there are 4 possibilities:
A
Setting the reference by multiple pieces with fix reference values.
B
Setting the reference by multiple pieces with variable reference
values.
C
Setting the reference for 1 piece in weighing mode.
D
Setting the reference for 1 piece in manual mode.
FIX 10 PCS
C
10PCS
------
FIX 10 PCS
A
Setting possibility
A
Setting the reference by multiple pieces
a) Select a number of reference pieces by scrolling with « ». Pos
sible numbers* are 5, 10, 20 and 50.
* with approved balances in selected countries: min 10
b) Press « » to tare. If needed: place empty container on the
weighing pan and tare again.
c) Add the selected number of reference pieces to container.
d) Press «
» to confirm.
C
------
VAR.REF
25PCS
B
15
PCS
REF.
25
PCS
REF.
Setting possibility
B
Setting the reference by multiple pieces with variable refer
ence values
a) Select "VAR.REF" by scrolling with « ». Press « » to confirm.
b) Select a number of reference pieces by scrolling up («+» key) or
down («-» key). Speed up by press and hold. Possible numbers*
are 1 to 999.
* with approved balances in selected countries: min 10
c) Press « » to tare. If using: place empty container on the
weighing pan first or tare again.
d) Add the selected number of reference pieces to container.
e) Press «
» to confirm.
38 Application "Piece Counting"