Operating instructions

"TIME.FRM" – Time Format

This menu topic allows you to preselect the time format.

The following date formats are available:

Display examples

"24:MM" 15:04

"12:MM" 3:04 PM

"24.MM" 15.04

"12.MM" 3.04 PM

Factory setting: "24:MM"

"RECALL" – Recall

This menu topic allows you to switch the "RECALL" function on or off. When it is switched on recall stores the

last stable weight if the absolute display value was bigger than 10d.

"OFF"

"ON"

"RECALL" switched off (Factory setting)

"RECALL" switched on

Note: The recall value is displayed with an asterisk and cannot be printed.

"STARTUP" – Startup Mode

You can set your balance such that it either immediately starts from the standby mode when you load a weight

or it must be switched on with the «ON/OFF» key after which it then performs a display test.

Note: This topic is not visible with approved balances (only available in selected countries).

"QUICK" "Quickstart": The balance can be started directly from the stand

by mode and is immediately ready for weighing. You can load

the weight in the standby mode and the balance immediately

shows the current weighing result. This is the Factory setting

Note: Standby mode is available on line powered balances only.

"FULL" Start with display test: You must switch on the balance with the

«ON/OFF» key. After it has been switched on, it performs a dis

play test for approx. 2 sec. in which all display elements lights

up, it shows "WELCOME", software version, maximum load and

readability. The balance is ready for weighing.

"SHUTOFF" – Automatic Shutoff

If the automatic shutoff function is activated, the balance automatically switches itself off after a preselected

time of inactivity (i.e. with no key being pressed or changes of weight occurring etc.) and is switched to the

standby mode.

"A.OFF:10' " Automatic shutoff after 10 minutes of inactivity. (Factory setting)

"A.OFF – " Automatic shutoff not activated.

"A.OFF:2' " Automatic shutoff after 2 minutes of inactivity.

"A.OFF:5' " Automatic shutoff after 5 minutes of inactivity.

"B.LIGHT" – Backlight

Under this menu topic, the display backlight can be switched off automatically. If the automatic switch-off is

activated, the backlight will turn off automatically after the selected period of inactivity has elapsed. The back

light is reactivated when a key is pressed or the weight is changed.

"B.L. ON" Backlight is always on. (Factory setting)

The Menu