Operating instructions

SAVE:YES

SAVE:NO

Saving Settings and Closing the Menu

a) Press and hold « » to leave menu topic.

b) Press « » to execute "SAVE:YES". Changes are saved.

c) Press «

» to execute "SAVE:NO". Changes are not saved. To tog

gle between "SAVE:YES" and "SAVE:NO" press « ».

Cancel

For leaving menu topic or menu selection without saving press «C»

(one step back in the menu).

Note: If no entry is made within 30 seconds, the balance reverts to last active application mode. Changes are

not saved. If changes are made, the balance asks "SAVE:NO".

6.3 Description of Menu Topics

In this Section you will find information regarding the individual menu topics and the available selections.

6.3.1 Main Menu

Selecting the menu.

"BASIC" The small "BASIC" menu for simple weighing is displayed.

"ADVANCE." The extended "ADVANCE." menu for further weighing settings is

displayed.

"INT.FACE" The menu "INT.FACE" for all interface parameter settings for

peripheral devices e.g. printer is displayed.

"PROTECT" Menu protection. Protection of balance configurations against

unmeant manipulation.

"OFF" Menu protection is off. (Factory setting)

"ON" Menu protection is on. The menu BASIC, ADVANCE. and INT.FACE

are not displayed. This is indicated with "

" in the display.

Note:

●

The menu selection "BASIC", "ADVANCE." or "INT.FACE" can not be saved.

●

To activate "PROTECT" "ON" or "OFF", this selection must be saved.

6.3.2 Basic Menu

"DATE" – Date

Setting the current date according to date format.

Note: A reset of the balance will not change this setting.

"TIME" – Time

Setting the current time according to time format

"+1H" Set the current time forwards by 1 hour (to adjust summer or

winter time). (Factory setting)

"-1H" Set the current time backwards by 1 hour (to adjust summer or

winter time).

"SET.TIME" Enter the current time.

The Menu