Operating instructions

Topic Description
RS E.O.L. Setting the end of line format of the serial interface RS232C.
RS.CHAR Setting the char set of the serial interface RS232C.
INTERVL. Selection of the time interval for the simulated print key press.
6.2 Menu Operation
In this Section you will learn how to work with the menu.
406.2
g
ADVANCE
BASIC
Select Menu
a) Press and hold « » to activate main menu. The first menu
"BASIC" is displayed (except menu protection is active).
b) Press « » repeatedly to change menu (Scrolling down/up «+» /
«–» keys).
c) Press « » to confirm the selection.
Note: The menu selection "BASIC", "ADVANCE." or "INT.FACE" can not
be saved. The selection "PROTECT" must be saved.
TIME
DATE
Select Menu Topic
Press « ». The next menu topic appears in the display. Each time
the « » or the «+» key is pressed, the balance switches to the next
menu topic; the «–» key to the previous menu topic.
ENVIRON.
STABLE
ENVIRON.
Change Settings in a Selected Menu Topic
a) Press « ».The display shows the current setting in the selected
menu topic. Each time « » or «+» is pressed, the balance
switches to the next selection; press «–» to the previous selection.
After the last selection, the first is shown again.
b) Press « », the selected setting is accepted but not yet executed.
The settings are executed only after "SAVE:YES" has been con
firmed.
Change Settings in a Submenu Selection
The same procedure as for menu topics.
01. 2500
01. 6500
01.6500
Input Principle of Numerical Values
a) Press « » for input of numerical values.
b) Press « » to select a digit or a value (depending on the appli
cation). The selected digit or the selected value is blinking.
c) For changing digits or values, press «+» to scroll up or «–» to
scroll down.
d) Press « » to confirm the input.
26
The Menu