Operating instructions

6 The Menu
6.1 What is in the Menu ?
The Menu allows you to match your balance to your specific weighing needs. In the menu
you can change the settings of your balance and activate functions. The main menu has 4
different menus and these contains 35 different topics, each of which allows you various
selection possibilities. For Menu "PROTECT" see chapter "Description of menu topics" section
"Main menu".
Note: See Quick Guide for the graphical overview of the menu (Menu Map) with all setting possibilities.
Menu "BASIC"
Topic Description
DATE Setting the current date.
TIME Setting the current time.
UNIT 1 Specification of the 1
st
weight unit in which the balance should show the result.
UNIT 2 Specification of the 2
nd
weight unit in which the balance should show the result.
KEY.BEEP Setting the key beep level.
STB.BEEP Setting the stability beep level.
RESET Call up of the factory settings.
Menu "ADVANCE."
Topic Description
ENVIRON. Matching the balance to the ambient conditions.
CAL Settings for the type of adjustment (calibration).
DATE.FRM Setting the date format.
TIME.FRM Preselection of the time format.
RECALL Switching the application "Recall" for storing stable weights on or off.
STARTUP Setting the mode which the balance powers up ("FULL" or "QUICK").
SHUTOFF Setting the time after which the balance should be switched off automatically.
B.LIGHT Setting the time after which the display backlight should be switched off automatically.
A.ZERO Switching the automatic zero correction (Autozero) on or off.
ZERO.RNG Setting the zero limit of the zero/tare key.
ASSIGN:F Selection of assigned F key application and entering their parameter settings.
DIAGNOS. Starting a diagnostic application.
SRV.ICON Switching the service reminder (service icon) on or off.
SRV.D.RST Reset service date and hours (service reminder)
Menu "INT.FACE"
Topic Description
RS232 Matching the serial interface RS232C to a peripheral unit.
HEADER Setting the header for printout of individual values.
SINGLE Setting the information for printout of individual values.
SIGN.L Setting the footer for printout of individual values.
LN.FEED Setting line feed for printout of individual values.
ZERO.PRT Setting the auto print function for printing zero.
COM.SET Setting the data communication format of the serial interface RS232C.
BAUD Setting the transfer speed of the serial interface RS232C.
BIT.PAR. Setting the character format (Bit/Parity) of the serial interface RS232C.
STOPBIT Setting the character format (stop bit) of the serial interface RS232C.
HD.SHK Setting the transfer protocol (Handshake) of the serial interface RS232C.
25The Menu