Operating instructions

5.5 Recall / Recall Weight Value

Recall stores stable weights with an absolute display value bigger than 10d.

Requirement: The function "RECALL" must be activated in the menu.

121



121

a) Load weighing sample. The display shows weight value and

stores stable value.

b) Remove weighing sample. When the weight is removed the Dis

play shows zero.

c) Press «

». The display shows last stored stable weight value for

5 seconds together with asterisk (*) and Memory (M) symbols.

After 5 seconds the display goes back to zero. This can be repeat

ed unlimited times.

Delete last weight value

As soon a new stable weight value is displayed, the old recall value

becomes replaced by the new weight value. When pressing

« », the recall value is set to 0.

Note: If the power is switched off, the recall value is lost. The recall

value can not be printed.

5.6 Weighing with the Weighing-in Aid

100%

The weighing-in aid is a dynamic graphic indicator which shows the

used amount of the total weighing range. You can thus recognize at a

glance whether the load on the balance approaches the maximum

load.

5.7 Print / Transmit Data

Pressing the « » key transmits the weighing results over the interface

e.g. to a printer or a PC.

Weighing Made Simple