Operating instructions

5 Weighing Made Simple

This section shows you how to perform simple weighings and how you can accelerate the

weighing process.

5.1 Switching the Balance On and Off

This section shows you how to perform simple weighings and how you can accelerate the weighing process.

Off

8888888

XXXXXXX

Switching On

a) Remove any load from weighing pan.

b) Press «On».

The balance performs a display test (all segments in the display light

up briefly), "WELCOME", Software version, Maximum load and Read

ability appears briefly. (Startup "FULL" mode only)

The balance is ready for weighing or for operation with the last active

application.

SHUTOFF

Off

Switching Off

Press and hold the «Off» key until "SHUTOFF" appears on the display.

Release the key.

When Quickstart is selected (Advanced menu, topic "STARTUP" > "QUICK"): Once your bal

ance has been switched off, it is in standby mode. In this case your balance needs no warm-

up time in the standby mode and is immediately ready for weighing. If you wish to perform a

weighing, you now only need to place the sample on the weighing pan and the balance

immediately displays the result. There is no need to switch it on with the «On/Off» key.

●

If your balance has been switched off after a preselected time, the display is dimly lit and

shows date, time, maximum load and readability.

●

If your balance has been switched off manually, the display is off.

Note:

●

Quickstart is not possible with approved balances (only available in selected countries).

●

Standby mode is available on line powered balances only.

Weighing Made Simple