Operating instructions

Balances with readability of 1 mg, with flex draft
shield (105 mm)
Place the following components on the balance in the
specified order:
a) Place bottom plate (1) (push and turn)
b) Place pan support (2) with weighing pan (3).
c) Unfold the draft shield frame (4) and place it cor
rectly.
d) Insert the glass panels (5) into the draft shield
frame.
e) Place draft shield top (6)
Balances with readability of 10 mg with square
weighing pan and draft shield element
a) Remove the two screws (1)
b) Remove the plate (2) and retain it.
c) Place draft shield element (3) and fix it with the
two screws.
d) Place pan support (4) with weighing pan (5).
Balances with readability of 0.01 g / 0.1 g with
round weighing pan
Place the following components on the balance in the
specified order:
●
Pan support (1)
●
Weighing pan (2)
15Setting up the Balance