Operating instructions

4.2 Installing the Components
Balances with readability of 0.1 mg, with draft
shield (235 mm)
Place the following components on the balance in the
specified order:
Note: Push the side glass door (1) back as far as will
go.
●
Bottom plate (2)
●
Draft shield element (3)
●
Pan support (4)
●
Weighing pan (5)
Balances with readability of 1 mg, with draft shield
(235 mm)
Place the following components on the balance in the
specified order:
Note: Push the side glass door (1) back as far as will
go.
●
Bottom plate (2)
●
Pan support (3)
●
Weighing pan (4)
14
Setting up the Balance