Specifications

Transmitter O
2
M300 52
© 05/07 Mettler-Toledo AG, CH-8606 Greifensee, Switzerland Transmitter O
2
M300
Printed in Switzerland 52 121 305
11.2.1.1 Current
Enter the value for Point 1 in milliamps of the current source connected to the input.
Enter the value for Point 2 in milliamps of the current source connected to the input.
Pressing the [ENTER] key after entering Point 2 will bring up a confirmation screen. Selecting
„No" will discard the entered values, selecting „Yes" will make the entered values the current
ones.
11.2.1.2 Temperature
Enter the value for Point 1 of the calibration, according to the attached Resistor.
Enter the value for Point 2 of the calibration, according to the attached Resistor.
Enter the value for Point 3 of the calibration, according to the attached Resistor.
Pressing the [ENTER] key after entering Point 3 will bring up a confirmation screen. Selecting
„No" will discard the entered values, selecting „Yes" will make the entered values the current
ones.