Specifications

Transmitter O

M300 14

M300

Printed in Switzerland 52 121 305

4 Installation instruction

4.1 Unpacking and inspection of equipment

Inspect the shipping container. If it is damaged, contact the shipper immediately for instructions.

Do not discard the box.

If there is no apparent damage, unpack the container. Be sure all items shown on the packing

list are present.

If items are missing, notify Mettler-Toledo immediately

4.1.1 Panel cutout dimensional information – 1/4DIN models

1/4DIN Model transmitters are designed for panel-mount installation only. Each transmitter is

supplied with mounting hardware to provide fast and simple installation to a ﬂat panel or ﬂat

enclosure door. To insure a good seal and maintain IP integrity of installation, the panel or door

must be ﬂat and have a smooth ﬁnish. Hardware consists of:

Two – Snap-on Mounting brackets

One – Mounting gasket seal

Transmitter dimensions and mounting are shown in ﬁgures below.