Specifications

Chapter 8: Centerlign Weigh Modules
Sizing Weigh Modules
(12/99) 8-1
8
Centerlign Weigh Modules
Centerlign weigh modules are designed for dynamic loading applications such as
conveyors, pipe racks, mixers, and blenders. In addition to the load being weighed
(vertical force), these weigh modules can handle horizontal forces caused by the
sideways movement of the structure that they support. Each weigh module has four
basic components, which are shown in Figure 8-1.
Top Plate
Base Plate
Load Pin
Load Cell
Figure 8-1: Centerlign Weigh Module
Base Plate: This bottom plate is bolted or welded to the floor, foundation, or other
support structure to hold the weigh module in place.
Load Cell: This transducer uses a strain gauge to convert the mechanical force exerted
by the weight of a tank into an electric signal that provides a weight reading on an
indicator. The cantilever-beam load cell is bolted to the weigh module’s base plate.