Specifications

METTLER TOLEDO Weigh Module Systems Handbook
(12/99)13-4
Panther Indicator
The Panther indicator is a reliable scale terminal with basic capabilities for interacting
with processing equipment.
• Direct PLC Interface for Allen-Bradley RIO, Profibus-DP, or Modbus Plus.
Each Panther indicator needs its own PCB.
• Discrete I/O: One inputs and three outputs.
Two one-speed setpoints.
• BCD Output: Optional 9323 BCD module.
• Analog Output: Optional analog kit.
• Serial I/O: One bidirectional serial port (RS-232).
• Filtering: TraxDSP with basic selection of filtering levels.
• Internal Resolution: 1,000,000 increments.
• Load Cells: Supports up to eight 350Ω load cells.
• Enclosures: Panel mount and harsh environment.
Puma Indicator
The Puma indicator is an intrinsically safe scale terminal for use in hazardous
environments. It uses fiber optic cables to communicate with peripheral equipment.
• Two optional fiber optic serial communication ports (RS-232/20 mA CL): BCD
output, analog output, and Host PC/PLC/DCS systems interface.
• Setpoints: When used with a 3015 Setpoint Controller, the Puma indicator can
provide four one-speed cutoffs and two two-speed cutoffs.
• Filtering: Selectable from 0.25 to 2.4 seconds.
• Internal Resolution: 1,000,000 increments.
• Load Cells: Supports up to four 350Ω load cells.
• Enclosure: Harsh environment.