Operating instructions

28
8.2 Technical data
LP16 (e.g. with PM480) LJ16
Power supply 115 V/230 V (selectable) 115 V/230 V (selectable)
admissible range 115 V 93 V ... 132 V 93 V ... 132 V
admissible range 230 V 187 V ... 264 V 187 V ... 264 V
Frequency 50 Hz ... 60 Hz 50 Hz ... 60 Hz
Power consumption max. 470 VA max. 470 VA
Temperature (range) 50 °C ... 160 °C 50 °C ... 160 °C
Graduation 5 °C 5 °C
Time switch (range) 0 ... 240 min 0 ... 240 min
Calculation modes 4 methods 4 methods
Percent calculation (range for ATRO) 0 ... 999 % 0 ... 999 %
Resolution (sample >10 g) 0.01 % 0.01 %
Resolution (sample <10 g) 0.1 % 0.1 %
Repeatability (sample = 1 g)
1
) 0.2 % 0.3 %
Repeatability (sample = 10 g)
1
) 0.02 % 0.03 %
Minimum sample weight 0.1 g 0.1 g
Maximum sample weight 400 g 300 g
Resolution of balance 1 mg 1 mg
1
) To achieve this repeatability, the instrument must have been switched on for at least 2 hours.
(applies to a typical drying time of approx. 10 min.).