Operating instructions

7. Maintenance

7.1 Changing the fuses

Changing “3.15 A slow-blow” fuse

• Disconnect power cable of the dryer!

• Lever out holder (1) of the microfuse using a screwdriver.

• Change 3.15 A slow-blow microfuse (spare in holder).

• Plug in connector cable.

Changing “200 mA slow-blow” or “100 mA slow-blow” fuse

• Disconnect power cable of the dryer!

• Take out holder (2) particular microfuse with a screwdriver turning it to the left.

• Replace “200 mA slow-blow” or “100 mA slow-blow” microfuse (spare in the accessories).

• Push in holder (2) using a screwdriver and then secure by turning to right (up to stop).

• Plug in power cable.

Replacing microfuses of the balance

The spare fuse is in the fuse holder (4).

Fuse ratings: 115 V = 125 mA slow-blow

230 V = 63 mA slow-blow

• Disconnect power cable (3).

• Take out fuse holder (4) using a screwdriver.

• Remove blown fuse and insert new one.

• Replace fuse holder. Plug in power cable.