Operating instructions

7
2 Startup
2.1 Unpacking / standard equipment
M
E
T TL
E
R
T
O
L
E
D
O
F
C
a
l
/
M
e
n
u
C
O
n
o
ff
O
/
T
2.2 Cautionary notes
• JB balances must not be operated in hazardous areas with the standard-supply AC adapter.
• Before connecting the AC adapter, verify that the voltage printed on it corresponds to the local mains voltage.
If this is not the case, please contact your local METTLER TOLEDO dealer.
• JB balances may only be used indoors and in a dry environment.
• For use with an certified (CSA or equivalent) power supply, which must have a limited and SELV circuit
output.
All balances are supplied in environmentally compatible packaging.
The standard equipment for every balance comprises:
• AC adapter, to national codes
• Transparent plastic protective cover, fitted, to keep your balance clean at all times
• Operating instructions, to ensure optimum utilization of your balance‘s capabilities
• CE declaration of conformity (in separate brochure 11780294)
JB-L-G, JB-G/FACT:
• Weighing pan 180 x 180 mm with pan support
• Base plate and intermediate plate for protective cover, fitted
JB-L-C, JB-C/FACT:
• Weighing pan ø 80 mm with draft shield element
• Draft shield
• Carat pan
• Adjustment weight (only JB-L-C)