Operating instructions
33
7.1 Typical printouts from METTLER TOLEDO RS-P26, LC-P45 printers
7 Appendix
Notes
The operating instructions for
the LC-P45 include a descrip-
tion of the functions that are
triggered via that printer.
The RS-P26 prints all reports in
English. This applies also to the
LC-P45 reports that originate
in the balance. In the case of
reports triggered by the LC-P45,
the following languages may
be selected: German, English,
French, Spanish or Italian.
Function: Adjusting (FACT)
- BALANCE CALIBRATION -
12.02.2006 09:30:10
METTLER TOLEDO
Type: JB3002-G/FACT
SNR: 1118015657
SW: 1.20
Internal Cal. done
--------- END ----------
Function: Statistics
Function is triggered via the
printer.
1)
12.02.2006 10:44:07
ID 666
SNR: 1118015657
1 1100.15 g
2 1600.10 g
3 1699.95 g
n 3
x 1466.733 g
s 321.372 g
srel 21.91 %
min. 1100.15 g
max. 1699.95 g
dif. 599.80 g
--------- END ----------
Function: Multiplier
Function is triggered via the
printer.
1)
12.02.2006 08:23:22
ID 242
SNR: 1118015657
Factor 1.65
588.43 g
* 970.9095
Function: Verification of the
calibration (adjustment)
with external weight.
Function is triggered via the
printer.
1)
----- BALANCE TEST -----
12.02.2006 09:52:12
METTLER TOLEDO
Type: JB3002-G/FACT
SNR: 1118015657
SW: 1.20
Weight ID: .............
Target : ...............
Actual : .......199.98 g
Diff : ...............
External test done
Signature:
........................
--------- END ----------
Function: List
Printout of the current balan-
ce settings
--- LIST OF SETTINGS ---
12.02.2006 09:42:12
METTLER TOLEDO
Type: JB3002-G/FACT
SNR: 1118015657
SW: 1.20
------------------------
Application:
Dynamic A
------------------------
Weighing Parameters:
Weighing Mode Standard
Unit 1 g
Unit 2 g
A.Zero On
------------------------
Peripheral Devices:
P.Device Printer
Baud 2400
Bit/Parity 7b-even
Handshake Off
P.Device Host
Sendmode Off
Baud 9600
Bit/Parity 8b-no
Handshake Soft
Function: Adjusting (external)
- BALANCE CALIBRATION -
12.02.2006 09:40:16
METTLER TOLEDO
Type: JB3002-L-G
SNR: 1118015657
SW: 1.20
Weight ID: .............
Weight: 2000.00 g
External Cal. done
Signature:
........................
--------- END ----------
Function: Piece counting
Printout with reference weight
---- PIECE COUNTING ----
APW: 0.99460 g
Out of: 10 PCS
27.000 g
27 PCS
Function: Percent weighing
----- % - WEIGHING -----
Ref. 10.008 g
100.00 %
60.01 g
599.59 %
1)
Only possible with LC-P45.