Operating instructions

31
31
6.4 Optional equipment
AC adapter (universal) 11120270
(EU, USA, AU, UK)
100–240 V, 50–60 Hz, 0.3 A
12 VDC, 0.84 A
AccuPac B-S 21254691
Rechargeable external power source for 15 hours
weighing operation with no mains
connection
Adjustment weights 111795461
Available as OIML weights (E1, E2, F1,
with calibration certificate) For further
details see METTLER TOLEDO Weights
brochure
or see www.mt.com/weights
Antitheft device 00590101
Cable with lock
Auxiliary display (RS232C)
• Auxiliary display 12120057Auxiliary display 1212005712120057
• Auxiliary display RS-AD-L7 72213564
with backlit
• Auxiliary display RS-AD-7 72213565
without backlit
Carat pan
• small, ø 80 mm x 20 mm, aluminium 12102645, ø 80 mm x 20 mm, aluminium 12102645, aluminium 12102645
• medium, ø 90 mm x 30 mm, aluminium 12102646, ø 90 mm x 30 mm, aluminium 12102646, aluminium 12102646
• large, ø 90 mm x 45 mm, aluminium 12102647, ø 90 mm x 45 mm, aluminium 12102647, aluminium 12102647
Density kits (for JB-L-C, JB-C/FACT only) 0003336000033360
For determination of solids
Draft shield 11137468
Draft shield with sliding doors *
“mg” (165 mm)
* JB-G Balances require the weighing
pan Ø 175 mm 11103680
Interface cable
• RS9–RS25: (m/f), length 2 m 11101052
• RS9–RS9: (m/f), length 1 m 11101051
• RS9–RS9: (m/m), length 1 m 21250066
• RS232-USB Converter cable 11103691
Printer, Application printer (LC-P45) 00229119
Plain-paper printer, 24 characters, with
additional functions (time, date, statistic,
multiplier etc.)
Printer, Report printer (RS-P26) 12120788
Plain-paper printer, 24 characters
with additional functions (time, date)
Protective cover 11103681
For all JB models (1 piece)
Software
LabX direct balance 11120340
(Simple data transfer)
Transport case 11101050
For all JB-G/JB-C models
(Draft shield 165 mm / 141 mm)