Operating instructions

25
5.2 Percent weighing
Requirement
The function “F 100 %” must be activated in the menu (Section 4).
Set target weight
➞ Target weight (Reference weight, which corresponds to 100 %) in center of pan.
➞ Hold the «F» key down until “SEt 100 %” is displayed.
➞ Press the «“» key to select “SEt 100 %” or “SEt no %” (Percent weighing deactivated).
➞ The «±» key can be used briefly to confirm or automatic acceptance after 7 seconds. The target weight
is specified.
Note: The current target weight remains stored until a new target weight is set or the power supply is inter-
rupted.
Percent weighing / switching
➞ Place weighing sample in center of pan.
The weight of the sample is displayed as a percentage of the target weight.
➞ Press the «“» key, The weight is displayed. (Unit 1 and and Unit 2, if activated).
➞ Return to display in percent: pressing the «“» key again.
F
±
0.00 g
M
E
TT
L
E
R
T
O
L
E
D
O
F
C
a
l
/
M
e
nu
C
O
n
o
f
f
O
/
T
148.50 g
SEt100 %
100.0 %
101.6 %
M
E
TT
L
E
R
T
O
L
E
D
O
F
C
a
l
/
M
e
nu
C
O
n
o
f
f
O
/
T
150.88 g
101.6 %
“
“