Operating instructions

23
4.3.14 Baud rate (14th menu option)
Note: This menu option is only available if you have selected the setting “Host” in the 11th menu option
(Peripheral unit)!
The baud rate (data transfer rate) determines the speed of transmission via the serial interface. The unit is the
baud (bd) = 1 bit/second.
The following settings are available: 600 bd, 1200 bd, 2400 bd, 4800 bd, 9600 bd and 19200 bd.
For problem-free data transmission the sending and receiving devices must be set at the same value.
4.3.15 Bit/Parity (15th menu option)
Note: This menu option is only available if you have selected the setting “Host” in the 11th menu option
(Peripheral unit)!
At this menu option you can set the character format for the attached peripheral device.
7b–E 7 data bits/even parity
7b–no 7 data bits/no parity
8b–no 8 data bits/no parity
7b–odd 7 data bits/odd parity
4.3.16 Handshake (16th menu option)
Note: This menu option is only available if you have selected the setting “Host” in the 11th menu option
(Peripheral unit)!
This menu option allows you to match the data transmission to different serial receivers.
HS oFF No handshake
HS SoFt Software handshake (XON/XOFF)
HS HArd Hardware handshake (RTS/CTS)
7b-E
“
7b-no
8b-no
7b-odd
“
“
HS oFF
“
HS Soft
HS HArd
“
bd 2400
“
bd 4800
bd 19200
“
…