Operating instructions

22
4.3.12 Send format (12th menu option)
Note: This menu option is only available if you have selected the setting “Host” in the 11th menu option
(Peripheral unit)!
At this menu option you specify the data transfer format.
“SICS”: The MT-SICS data transfer formats are used. Please refer to the “MT-SICS Reference Manual
Basic-S balances 11780447” downloadable from the Internet (www.mt.com/sics-classic). More
Information please find in the Section 6.3.
“PM”*: The following PM balance data transfer formats are used:
S. Stb: /////1.67890/g S. Cont: S////1.67890/g
SD///1.39110/g
* unidirectional, no MT-SICS commands are accepted.
4.3.13 Send mode (13th menu option)
Note: This menu option is only available if you have selected the setting “Host” in the 11th menu option
(Peripheral unit)!
At this menu option you specify how data is transmitted to a peripheral device.
S. oFF Send mode switched off
S. Stb The next possible stable value will be transferred after the «±» key has been triggered.
S. Cont All values are transferred automatically.
S. oFF
“
S. Stb
S. Cont
“
SICS
“
PŸÖ