Operating instructions

4.3 Description of menu options

4.3.1 Reset or recording of balance settings (1st menu option “RESET”)

Reset balance settings

➞ Select “Reset”, press and hold down the «Cal/Menu» key until the message “r donE” confirms that all

menu settings have been reset. The balance then reverts to weighing mode and works with the factory

settings (Section 4.1).

Recording balance settings

➞ Select “List” and hold down the «Cal/Menu» key until the message “StorEd” is displayed.

The current balance settings are transmitted to the peripheral device connected to the optional interface.

To do this the setting “Printer” must always be selected at the 11th menu option (Peripheral unit). The

current balance settings are saved at the same time.

4.3.2 Adjustment (2nd menu option) (only available on JB-C/FACT and JB-G/FACT models)

Under this menu item you can select whether you wish to adjust the balance using the internal or the external

adjustment weight.

Adjusting with internal adjustment weight

Adjusting with external adjustment weight

rESEt

0.00 g

r donE

Cal/Menu

rESEt

LISt

“

StorEd

0.00 g

Cal/Menu

CAL int

CAL E

“

Cal