Operating instructions

15
4 Menu
4.1 Overview
In the menu you can change the weighing unit (for certified balances, only if the national certification law allows), select additional functions and carry out various
settings. A description of the individual menu options is given in Section 4.3.
Factory setting
Menu option
List
CAL E
Cal
rESEt
CAL int
Cal
no A2ZEro
A.ZEro
HoSt
2.diSPLAY
PrintEr
S. oFF
S. Cont S. Stb
bd 1200
bd 4800
bd 600 bd 9600
SICS
PÑÖ
bd 2400
bd 19200
7b-E
7b-odd 7b-no
8b-no
HS OFF
HS HArd HS SoFt
F count
PCS
F nonE
F 100%
robuSt doS
Std
UniuErS
StAbLE unStAbLE
Unit 1
g
Unit 1
Unit 1
cl
kg
Unit 1
Unit 1
t tl
mg
Unit 1
Unit 1
S tl
ct
Unit 1
Unit 1
H tl
lb
Unit 1
Unit 1
m
oz
Unit 1
Unit 1
mo
ozt
Unit 1
Unit 1
dwt
GN
FACt on
AutoCal
FACT off
Unit 2
g
Unit 2 Unit 2
cl kg
Unit 2 Unit 2
m mg
Unit 2 Unit 2
mo ct
Unit 2 Unit 2
dwt lb
Unit 2 Unit 2
GN oz
Unit 2
ozt
Prot off
Prot on
AutoCa
Unit 1
b t
Unit 1
t o
1 Reset
2 Adjustment
1)
5 Function
6 Weighing
mode
8 Weighing unit 1
2)
9 Weighing unit 2
4)
10 Autozero
2)
11 Peripheral
unit
13 Send mode
5)
12 Send format
5)
14 Baud rate
6)
15 Bit/Parity
6)
16 Handshake
6)
Notes
1)
This menu option is only available on
JB-C/FACT and JB-G/FACT models.
2)
With certified balances, this menu op-
tion has a fixed setting and cannot be
changed.
3)
These menu option is only shown if “FACT
on” (Factory setting) has been selected in
menu option 3 (FACT).
4)
With certified balances, only those weig-
hing units allowed by the appropriate na-
tional weights and measures legislation
may be selected.
Factory setting:
JB-G: “g”
JB-C: “ct”
5)
This menu option is only shown if
“Host” has been selected in menu option
11 (Peripheral unit).
6)
These menu options are only shown if
“Host” or “Printer” has been selected
in menu option 11 (Peripheral unit).
3 FACT
1) 2)
4 Protokol
1) 3)
7 Vibration
adapter
1)