Technical data

Chapter 3: Programming and Calibration
(9/00) 3-39
JAGXTREME Data Field Field Code* Length
Tare Source
wsx07 1 N (0=none, 1=pb, 2=kb, 3=auto)
**
Scale ID csx18 8 A/N
Setpoint Value
x = setpoint 1-8
spx05 10 A/N
Current Time
1
jag20 11 A/N
Current Date
1
jag19 11 A/N
Day of Week
1
jag21 10 A/N
Julian Date
1
jag07 5 A/N
Consecutive Number jag09 8 N
Literal 01
†
lit01 40 A/N
Literal 02
†
, etc lit02, lit.. 40 A/N
Prompt 01
‡
pmt01 16 A/N
Prompt 02
‡
, etc pmt02, pmt.. 16 A/N
Prompt 01 Response var01 As Programmed
Prompt 02 Response, etc var02, var.. As Programmed
Template 1
***
ptp01 As Programmed
Template 2
***
, etc ptp02, ptp.. As Programmed
* The “x” character in a code represents the number of the internal scale from
which data will come (unless otherwise noted). Number 1 represents internal
Scale A, 2 represents internal Scale B, and 5 represents scale E, which is the
summing scale. For example, to print the scale ID for scale A, the field code is
“cs118.”
** pb = pushbutton tare, kb = keyboard (preset) tare.
† Refer to the section entitled Configure Literals Sub-block in the Configure
Memory program block later in this chapter for more information on entering
literals.
‡ Refer to the section entitled Configure Prompts Sub-block in the Configure
Memory Program Block later in this chapter for more information on entering
prompts.
*** Using a template field code within a template will insert the entire template into
the output.
1
Updated only at “print” time.
The lengths shown in the table
reflect the length of the field when
matching the template to the
desired result. When calculating
the number of elements in the
template, JAGXTREME data fields
only take up seven characters.
.