Technical data

METTLER TOLEDO JAGXTREME Terminal Technical Manual

(9/00) 2-8

UltraRes and DigiTOL Load Cell Connections

The maximum recommended cable length for all DigiTOL bases is 50 feet (15.24

meters). The following diagram describes DigiTOL load cell terminal strip wiring.

JAGXTREME Terminal COM2 or COM4*

Port

DigiTOL NC TXDB

B/P Base

NC RXDB

7 Blue Gnd

1 Red TXD+

4 White NC TXD-

8 Black RXD+

6 Yellow RXD-

5 Green +20V

Shield

Chassis Ground

*When interfacing a DigiTOL or UltraRes base to COM4 (available on the optional Multifunction

PCB), W2 must be set for 20V. Refer to the section entitled JAGXTREME Terminal Jumper and

Switch Settings in this chapter.

Enhanced DigiTOL J-Box Connections

Use the following table to determine the cable gauge and recommended distance

between the JAGXTREME terminal and the Enhanced DigiTOL J-Box.

Cable Gauge Cable Distance

Part Number

6 cond. 24 AWG

Up to 150 feet

(45.72 meters)

510624370

14264100A

*6 cond. 20 AWG

Up to 300 feet

(91.44 meters)

510620370

*6 conductor 16 AWG cable can also be used. The maximum cable distance remains 300 feet.