Technical data

Chapter 1: Introduction
Specifications
(9-00) 1-7
Physical Dimensions
Panel Mount Enclosure— Alpha-numeric (PA)
Two integral brackets are used to mount this unit through a flat panel. The front panel
and associated panel clamping mechanism are designed to provide a NEMA 4 (IP65)
seal and accommodate a panel thickness from 16 to 11 gauge.
The panel-mount model measures:
10.05 in. (25.5 cm) × 5.6 in. (14 cm) at the front of the terminal
9.5 in. (24 cm) × 4.91 in. (12.5 cm) at the rear
8.03 in. (21 cm) deep
Abra
5.12±.0
9.58±.06
4XR 0.25±.01
Figure 1-b: JAGXTREME Panel Mount Model and Cutout Dimensions
OPEN