Technical data

Chapter 5: Installing and Launching JagXFILES
Installing JagXFILES
(9/00) 5-1
5 Installing and Launching JagXFILES
The documentation CD-ROM included with the JAGXTREME terminal includes
JagXFILES, a utility that allows for the uploading and downloading configurations
and JAGBASIC programs via a web browser. It simulates the embedded web server
in the JAGXTREME terminal, allowing the end user to create individual
configurations without connection to an actual JAGXTREME terminal.
Hardware and Software Requirements
A PC with:
! Windows 95/98/NT/2000 Operating System
! Internet Explorer 4.0 or higher
! Ethernet card or modem
! Networking and Dial-Up Networking configured if using a modem
! Ethernet or modem cable for JAGXTREME terminal
Installing JagXFILES
JagXFILES is located on the CD-ROM that accompanies the JAGXTREME terminal.
Simply open the JagXFILES folder and double-click on Setup.exe to launch the
program.
Browser and
JAGXTREME Setup
Refer to the networking section of the JAGXTREME terminal technical manual for
setup information. Once the web server is accessed, JagXFILES can communicate
to a JAGXTREME terminal. Note: Internet Explorer must be configured to bypass a
proxy server for the IP address of the local computer in order for JagXFILES to work.
Operating JagXFILES
Clicking Start, Programs, Mettler-Toledo, JagXfiles launches JagXFILES. Note that
JagXFILES is a web server. It cannot be operated while another web server is
running on your PC. Some operating systems automatically launch a personal web
server on power up. This server must be disabled before launching JagXFILES.
Next, launch your browser and enter the IP address of the computer on which you
are working in the browser’s address line. If you are not sure about your IP
address, right click on the JagXFILES icon in the system tray and select “IP Address
Help”. This will display your computer’s IP address.