Operating instructions
Table Of Contents
- Operating instructions
- Operating instructions in a nutshell
- Contents
- 1 Getting to know L/L-S balances line
- 2 Startup
- 3 Weighing
- 4 Menu
- 4.1 Overview
- 4.2 Menu operation
- 4.3 Description of menu options
- 4.3.1 Reset or recording of balance settings (1st menu option “RESET”)
- 4.3.2 Functions (2nd menu option / see Section 5 for their use)
- 4.3.3 Weighing mode (3rd menu option)
- 4.3.4 Weighing unit 1 (4th menu option “UNIT 1”)
- 4.3.5 Weighing unit 2 (5th menu option “UNIT 2”)
- 4.3.6 Autozero (6th menu option / see overview and notes in Section 4.1)
- 4.3.7 Auto shut off
- 4.3.8 Peripheral unit (8th menu option / see overview and notes in Section 4.1)
- 4.3.9 Send mode (9th menu option / see overview and notes in Section 4.1)
- 4.3.10 Send format (10th menu option / see overview and notes in Section 4.1)
- 4.3.11 Baud rate (11th menu option / see overview and notes in Section 4.1)
- 4.3.12 Bit/Parity (12th menu option / see overview and notes in Section 4.1)
- 4.3.13 Handshake (13th menu option / see overview and notes in Section 4.1)
- 5 Functions
- 6 Technical data, options, optional equipment
- 7 Appendix
Appendix
32
7.4 Maintenance and cleaning
Service
Regular servicing of your balance by a service technician prolongs its working life. Ask your METTLER TOLEDO dealer for details of
servicing options.
Cleaning
Wipe housing and weighing pan with a soft, lint-free cloth, and – if necessary – with a mild cleaning agent, e.g. soap solution.
Protect balance and weighing pan from soiling. Soiled In-use covers can be replaced on all balance types (see Section 6.3).
Note
After working with chemicals, it is advisable to wash or clean the weighing pan and the bottom plate (if draft shield fitted).
Although all materials are of high quality, corrosion may occur if corrosive substances are deposited on chrome steel for an
extended period of time (and if air is excluded, for example by a coating of grease).
Important
If you have to dispose of the instrument, contact your METTLER TOLEDO agency.
7.5 Declaration of conformity
The undersigned declare on behalf of
Mettler-Toledo GmbH
Im Langacher
CH-8606 Greifensee
that the balances METTLER TOLEDO AL… / PL… / PL…-S to which this declaration relates (serial number specified on the
product) are in compliance with the below mentioned EEC Directives (including all amendments)
73/23/EEC Low Voltage Directive
89/336/EEC Electromagnetic compatibility
Balances in certified version additionally comply with 90/384/EEC Non-automatic weighing instruments
and that following standards have been applied IEC/EN61010-1:2001, IEC/EN61326-1:1997+ A1:98 (class B)
for Canada, USA and Australia CAN/CSA-C22.2 No.1010.1-92, UL Std. No.3101-1, FCC, Part 15, class A
Greifensee, 31.10.2003
Mettler-Toledo GmbH
Laboratory & Weighing Technologies
Beat Lüthi Markus Gross
General Manager Manager Marketing