Operating instructions
Table Of Contents
- Operating instructions
- Operating instructions in a nutshell
- Contents
- 1 Getting to know L/L-S balances line
- 2 Startup
- 3 Weighing
- 4 Menu
- 4.1 Overview
- 4.2 Menu operation
- 4.3 Description of menu options
- 4.3.1 Reset or recording of balance settings (1st menu option “RESET”)
- 4.3.2 Functions (2nd menu option / see Section 5 for their use)
- 4.3.3 Weighing mode (3rd menu option)
- 4.3.4 Weighing unit 1 (4th menu option “UNIT 1”)
- 4.3.5 Weighing unit 2 (5th menu option “UNIT 2”)
- 4.3.6 Autozero (6th menu option / see overview and notes in Section 4.1)
- 4.3.7 Auto shut off
- 4.3.8 Peripheral unit (8th menu option / see overview and notes in Section 4.1)
- 4.3.9 Send mode (9th menu option / see overview and notes in Section 4.1)
- 4.3.10 Send format (10th menu option / see overview and notes in Section 4.1)
- 4.3.11 Baud rate (11th menu option / see overview and notes in Section 4.1)
- 4.3.12 Bit/Parity (12th menu option / see overview and notes in Section 4.1)
- 4.3.13 Handshake (13th menu option / see overview and notes in Section 4.1)
- 5 Functions
- 6 Technical data, options, optional equipment
- 7 Appendix

Appendix
30
Function: Adjusting
-BALANCE CALIBRATION-
Date: ................
Time: ................
METTLER TOLEDO
Type: PL1502
SNR: 1120053108
SW: 1.0
Weight ID: ............
Weight: 1000.00 g
External Cal. done
Signature:
........................
--------- END ---------
Function: Piece counting
Printout with reference
weight
---- PIECE COUNTING ----
APW: 0.99 g
Out of: 10 PCS
27.00 g
27 PCS
Function: Percent weighing
----- % - WEIGHING -----
Ref. 10.008 g
100.00 %
60.01 g
599.59 %
Function: Dynamic
weighing
--- DYNAMIC WEIGHING ---
Weigh Time: 2 s
DW 49.999 g
Function: Plus-minus
weighing
----- +/- WEIGHING -----
Nominal: 9.68 g
+/-Tol: 1.04 %
16.21 g
above range
7 Appendix
7.1 Typical printouts from METTLER TOLEDO GA42 and LC-P45 printers
Function: Free factor
- FREE FACTOR WEIGHING -
Formula: factor * weight
Factor: 12.73
Step: 0.01
49.94 #
Function: List
Printout of the current
balance settings
--- LIST OF SETTINGS ---
Date: .................
Time: .................
METTLER TOLEDO
Type: PL601-S
SNR: 1120053108
SW: 1.0
TDNR: 7.17.1.286.108
------------------------
Application:
Count
------------------------
Weighing Parameters:
Weighing Mode Standard
Unit 1 g
Unit 2 mg
A.Zero On
------------------------
System Parameters:
Auto off 10 min
------------------------
Peripheral Devices:
P.Device Printer
Baud 2400
Bit/Parity 7b-even
Handshake Off
P.Device Host
Sendmode Off
Baud 9600
Bit/Parity 8b-no
Handshake Soft
--------- END ----------
Function: Verification of
the calibration
(adjustment) with external
weight.
Only possible with LC-P45.
Function is triggered via the
printer.
----- BALANCE TEST -----
04.07.2002 09:52:12
METTLER TOLEDO
Type: PL1502
SNR: 1120053108
SW: 1.0
Weight ID: .............
Target : ...............
Actual : .......199.98 g
Diff : ...............
External test done
Signature:
........................
--------- END ----------
Function: Statistics
Only possible with LC-P45.
Function is triggered via the
printer.
04.07.2002 10:44:07
ID 666
SNR: 1118015657
1 1100.15 g
2 1600.10 g
3 1699.95 g
n 3
x 1466.733 g
s 321.372 g
srel 21.91 %
min. 1100.15 g
max. 1699.95 g
dif. 599.80 g
--------- END ----------
Function: Multiplier
Only possible with LC-P45.
Function is triggered via the
printer.
04.07.2002 08:23:22
ID 242
SNR: 1118015657
Factor 1.65
588.43 g
* 970.9095
Notes
With the GA42 the date and
time must be entered by
hand at the top of the report
(see specimen printout for
the “Adjusting” function).
With the LC-P45 the date
and time are recorded auto-
matically (see specimen
printout for the “Statistics”
function).
The operating instructions
for the LC-P45 include a
description of the functions
that are triggered via that
printer.
The GA42 prints all reports
in English. This applies also
to the LC-P45 reports that
originate in the balance. In
the case of reports triggered
by the LC-P45, the following
languages may be selected:
German, English, French,
Spanish or Italian.