Operating instructions

88 METTLER TOLEDO DE40/50/51 Density Meter
MemoCard DE40/50/51 (Short Instructions)
Sample No, Sample ID
(and number of samples if
Sample file ON)
Viscosity correction (DE51, DE40 with
Memory Card Viscosity)
Select print format
off
short
GLP
variable
Set measurement parameter
Method name
Measuring temperature
Stability
Wait time
Sequence (ON/OFF)
Sampling
Drain
Rinse-1
Rinse-2
Purge
Calculation parameter
Result
d, d
t
t
, d
t
4
BRIX, API, Alcohol (if selected)
Concentration
(enter table)
(enter coefficients)
Temperature compensation
(enter coefficients)
Decimals
for d
t
for d
t
t
, d
t
4
(if temp.comp. select.)
BRIX, API, Alcohol (if selected)
for Conc. (if Conc. selected)
Method selection
Method 0 to 9
Display selection
Density
Oscillation
BRIX, API, Alcohol (if so selected)
Conc. (if Conc. selected)
Print message or parameter
Start measurement
(including sample sequence
if Sequence ON)
Report
Sample
Meas.
Para
Function
Setup
Print
Function selection
0. Data file
1. Sample file (ON/OFF)
2. Method File
3. Changer
4. Factor
5. Set check
(name, value, tolerance)
6. Periodic (check and adjustment)
(check interval)
(show check list)
7. Autostart
8. Card utility
9. Memory clear
Setup selection
0. Interface
(Printer, RS-232)
1. Date & Time
2. Name
3. Serial/Version No.
4. LCD contrast
5. International
(date format)
(°C or °F)
6. Lock
7. Beep
8. Temperature calibration
Run instrument check
Periodic check (on check date)
Daily check (all other dates)
Perform adjustment
Backspace (erase)
Rinse/Purge, only for SC24 and DCU-300
(Sequence must be ON)
Pump ON/OFF, for ASU-DE
Clear entry (2 x to clear name)
Escape
Return to main display
Reset
Esc.
Clear
Rinse/
Purge
BS
Calib.
Check
Pump
Display
Method
Measure
Calc.
Para