Operating instructions

METTLER TOLEDO DE40/50/51 Density Meter 73
13.3 How to retrieve an application (Uninstall table)
This section will show you how to retrieve an application from the instrument, for example to
transfer it to another instrument.
Insert the empty Application Memory Card into the slot on the front left part of the instrument.
Press the <FUNC> key.
Select “8.CARD utility”. Confirm with
<ENTER>.
Select “7.Uninstall Table”. Confirm
with <ENTER>.
Select “0.Conc.Table” if your appli-
cation is a concentration table:
BRIX, ALCOHOL, CONCENTRATION,
or select “1.Temp.Table” if your
application is a temperature table:
API.
Confirm with <ENTER>.
The asterisk (*) on the left of the application (BRIX) shows that this application has been
downloaded and removed from the Memory Card. This means that the Memory Card is
empty, but can still be used to retrieve the application from the instrument.
Select the application to uninstall
with the <UP> and <DOWN> keys.
Select “Uninstall” with the -> key.
Confirm with <ENTER>.
Wait until the application has been
uninstalled.
< Function >
0.Data File 5.Set Check
1.Sample File 6.Periodic
2.Method File 7.Auto Start
3.Changer 8.CARD utility
4.Factor 9.Memory Clear
< CARD utility >
0.Data delete 5.Table Capacity
1.Sample delete 6.Install Table
2.Method delete 7.Uninstall Table
3.Format
4.CARD Information
< Uninstall Table >
0.Conc.Table
1.Temp.Table
2.Exit
Application Memory Card
< Uninstall Table >
Table Name Type Temp. Data.
*Brix Conc. 20.00°C 85
Exit Uninstall
< Uninstall Table >
Now Uninstall ...