Operating instructions

62 METTLER TOLEDO DE40/50/51 Density Meter
Wait until all data have been saved.
Press <ENTER>.
Your data are now saved on the memory card, you can clear the internal memory of the
instrument (see next section).
12.3 Clear measured data
Let’s assume that you have saved the previously performed 35 measurements (previous
section). Once your data are saved on the memory card you can clear the internal memory of
the instrument.
Press the <FUNC> key.
Select “9.Memory Clear”. Confirm
with <ENTER>.
Select “0.Measured Data”. Confirm
with <ENTER>.
Select “Yes” with the → key. Confirm
with <ENTER>.
A beep sound will indicate that the
memory has been cleared.
Data Memory Card
< Save Data File >
Now Saving ...
File save is complete
[ OK ]
< Function >
0.Data File 5.Set Check
1.Sample File 6.Periodic
2.Method File 7.Auto Start
3.Changer 8.CARD utility
4.Factor 9.Memory Clear
< Memory Clear >
0.Measured Data 4.Method Parameter
1.Sample File 5.All Parameter
2.Periodic Check
3.Periodic Calib.
< Memory Data Clear >
Clear Execute ? No Yes