Operating instructions

60 METTLER TOLEDO DE40/50/51 Density Meter
12. Memory Cards (DE40, DE50 and DE51)
The following two sections describe the use of the memory cards. There are two types of
memory cards to be used with the DE40, DE50 and DE51 density meters:
Data Memory Card: SRAM cards.
For measurement data, methods and sample files (ME-51324004).
Application Memory Card: FLASH cards.
For the following applications:
• ALCOHOL (ME-51324000)
• BRIX (ME-51324001)
• API (ME-51324002)
• VISCOSITY CORRECTION (ME-51324003)
• CONCENTRATION TABLES (ask your local representative)
12.1 Data Memory Cards: data, methods, sample files
These Data Memory Cards are SRAM cards, have a capacity of 1 MB and use a lithium
battery. The cards are used to store measurement data, methods or/and sample files. You
can store up to:
982 Methods (if only methods are stored),
498 Sample files (if only sample files are stored),
10 Data files, each file containing up to 100 data (if only data files are stored).
If you store a combination of methods, sample files and data files the number of available
free space will decrease. In order to see how much free space is available, perform following
steps:
Press the <FUNCTION> key.
Select “8.CARD utility”. Confirm with
<ENTER>
Insert a Data Memory Card into the
slot on the front left part of the
instrument.
Select “4.CARD Information”.
Confirm with <ENTER>.
Data Memory Card
< Function >
0.Data File 5.Set Check
1.Sample File 6.Periodic
2.Method File 7.Auto Start
3.Changer 8.CARD utility
4.Factor 9.Memory Clear
< CARD utility >
0.Data delete 5.Table Capacity
1.Sample delete 6.Install Table
2.Method delete 7.Uninstall Table
3.Format
4.CARD Information