Operating instructions

52 METTLER TOLEDO DE40/50/51 Density Meter
When you have chosen "On", you
can define the time interval between
two measurements. Confirm with
<ENTER>. Enter 0 to start the next
measurement imme-diately after the
end of the actual measurement (no
time interval).
In "Meas. Times" you define the number of repetitive measurements to be performed with
this sample. Enter 0 for continuous measurement. In this case press Reset to stop the
measurements.
10.9 CARD Utility (Function 8)
This function is used together with the Memory Cards.
See section 12 "Data Memory Cards" and section 13 "Application Memory Cards" for more
information.
< CARD Utility >
0.Data Delete 5.Table Capacity
1.Sample Delete 6.Install Table
2.Method Delete 7.Uninstall Table
3.Format
4.CARD Information
Functions
< Auto Start >
Auto Start :Off On
Interval Time :[ 10]min
Meas.Times :[ 0]
Exit :[Execute]