Operating instructions

46 METTLER TOLEDO DE40/50/51 Density Meter
Now you can resume the statistics calculation again and then print the results without the
marked measurements. If you selected the data print "On" the excluded measurements will
be printed with an asterisk before the sample number.
10.2 Sample File (Function 1)
This function is used normally when the instrument is operated in connection with a sample
changer.
It is automatically set to ON when a
Sample Changer has been selected
(see Function 3).
It can also be used without Sample Changer to run standard measurements always in the
same sequence. See also section 6.1 "Sample File" for more information.
10.3 Method File (Function 2)
This function is used together with a Data Memory Card to save and load a method file.
See section 12. "Data Memory
Cards" for more information.
10.4 Changer (Function 3)
Here you can define the connected sample changer (SC24 or CHG-241) or auto sampling
unit DCU-300.
Press function 3 (Changer) and confirm with <ENTER>.
Choose the desired equipment using
the → key:
None, DCU-300, SC24, SOP40,
SOP50 or CHG-241. Confirm with
<ENTER>.
When choosing the SC24 you can define whether the measuring series is started with a
calibration (On) or not (Off).
Note: Select CHG-241 if you connect a CHG-260.
< Sample File >
Sample File : Off On
Exit : [Execute]
< Method File >
No. Name Temp.(°C) Result .
0. ORANGE 20.0 d
1. GRAPE 20.0 d
2. LEMON 20.0 d
3. APPLE 20.0 d
Load Save Exit
< Changer >
Changer : <SC24 >
Exit : [Execute]
Functions