Operating instructions

METTLER TOLEDO DL36 19
Key selection Display/Entry (example)
Setup
Setup [1-8]? 3
Enter
A
Enter
A_
Enter
A._
Enter
A. _
•
•
.
Setup
8.3 Entering the user identification
In this menu you can enter your name; it appears on every GLP report.
You can enter the user and the instrument identification alphanumerically using the "minus",
"period" and numeric keys.
When you press this key for the first time, the letter A is displayed, for the second
time B → C → ... Z → . (period) → – (minus) → "space" → A →...
When you press this key for the first time, a "space" is displayed, for the second
time a – (minus) → . (period) → Z → Y → ... A → – "space" →...
You must confirm each letter (character) with Enter for it to be accepted.
Description
"User ID" flashes in the display.
Enter, e.g. "A. Aichert": Press the "–" key.
Press the "." key repeatedly until a period appears.
Press the "–" key repeatedly until a space appears
etc.
You can enter maximum 15 characters.
8.4 Instrument identification
On delivery of the DL36, its correct identification is stored (see model plate at the rear); it
appears on every GLP report. You can change the identification.
Key selection Display/Entry (example)
Setup
Setup [1-8]? 4
Enter
MMA06408 ..... D
Enter
DL
Enter
DL3
•
•
Description
"Instr ID" flashes in the display.
Enter, e.g. "DL36-1A": Press the "–" key repeatedly
until D appears.
Press the "–" key repeatedly until L appears.
Press the "3" key etc.
You can enter maximum 8 characters.