Operating instructions

METTLER TOLEDO DL36 9
Example with stable drift, this also means that the electrode
potential must lie in the vicinity of this value at the end point
of a titration.
5.2 The display
The display has space for 16 characters. Depending on the key selection, menu items,
parameters or the prompt <Run> for the start of the titration are displayed: The following are
shown during the titration:
• the drift in µg/min
• the status ✽ character during pretitration and the titration (sample determination))
character for the start of a titration with the information: "Ready" or
"Stable" (see next section)
• the changing, calculated moisture content.
112 ✽ Pre-Titr
479 ✽ 206.2µg
Pot. 201.5 mV
Keypad and display
current drift value
during the pretitration
current drift amount of water titrated
value up to this point
during the titration