Operating instructions

2 Startup

2.1 Unpacking / standard equipment

All B balances are supplied in an environmentally harmless package. The standard equipment of the

B balances includes

• AC adapter, to national codes,

• weighing pan

• operating instructions, to allow optimum utilization of the capabilities of your balance,

• Description of interface commands (“MT-SICS Reference Manual, available in English only)

• calibration weight, with AB balances only,

• draft shield, mounted with AB balances, for mounting by user in the case of PB balances with a round

weighing pan.

Note

Adjusting weights can be ordered from METTLER TOLEDO for all other B balances, see section 6.2.

2.2 Cautionary notes

• B balances may not be operated in hazardous areas.

• Before attachment of the AC adapter, check whether the imprinted voltage value matches the local supply

voltage. If it does not, contact your local dealer.

With the PS-EX2 power supply unit available as an accessory, all B balances can be used in hazard

zone 2 (section 6.3).