Operating instructions

ManualsBrandsMettler Toledo ManualsComputer equipmentGA42

6.3 Optional equipment

Adjusting weights

Available as OIML weights (E1) (E2, F2

with certificate)

for further details, see METTLER TOLEDO weights

brochure 721192

or as adjusting weights (not OIML)

Draft shields

AB54 224371

AB104, AB204 224370

PB153, PB303, PB303DR 224372

Note: AB54 and AB104 draft shields can also be used

for PBxx3 models.

Protective covers (set of 3)

AB54-204 228183

PB153-303 224007

PB302-3001 224008

PB5001-8000 228182

SB models 230018

Dust covers for AB104, 204 238465

AC adapters

Euro (230 V) 228063

Euro (ground contact) (230 V) 228198

UK (240 V) 228066

US (120 V) 228064

Japan (100 V) 228065

Australia (bench version) (240 V) 228190

Hazard Zone 2

Standard AB, PB, SB models are not compliant for

Hazard Zones 0, 1 or 2.

For Explosion Zone 2, only the special versions ../02 and

../03 (same features) are ready for compliance.

It is not allowed to use them for EX-Zone 1 and 0.

All models are available in approved versions.

Following accessories are available for the use of the

balance in Explosion Zone 2:

• Special AC adapter PS-EX2

(compulsory) 21200182

• Optical isolator RS-OPTOEX2 for

data export 224265

PowerPack

Line-independent, rechargeable external

power source, for 10 hours weighing

operation (see section 4.2.6) PP-B10

Connection plate PowerPack/balance

long, for PB, SB 230166

short, for SB 230168

Hook for weighing below the balance

for all SB models 21301097

Density kits (for AB only)

• For determination of solids 33360

• For determination of liquids

with displacement body 33360+210260

Transport case

for all PB models, accommodation for

balance and PowerPack 224009

for all SB models, accommodation for

balance and PowerPack 230031

Antitheft devices (see also section 2.3)

• Cable with lock (for all models) 590101

• Bolt and lock (for AB, PB) 229175

B-M emulation 21301730

Software EPROM for the use of B balances in sys-

tems together with METTLER TOLEDO PM balances

RS232C interface and interface accessories

Every B balance is fitted with an RS232C interface for

attachment to a peripheral device (e.g. printer or PC with

a 9-pin male connector). Matching to a different device

can be carried out in the menu (sections 4.2.7–4.2.10).

You will find a detailed descrip-

tion of the available interface

commands in the enclosed

brochure “Reference Manual

MT-SICS, available in English

only)

The wide range of features of

the B balances regarding

documentation of the results can not be exploited to the

full until a printer, e.g. the GA42 or LC-P45 from

METTLER TOLEDO is attached. The printed results make a

decisive contribution to a simple way of working in

compliance with GLP/GMP.

Printers with normal paper

• Application printer with adjustment, statistics and

multiplication function as well as time and date,

24 characters LC-P45

• Simple printer, 24 characters,

without time/date GA42

Cables and cabling accessories

• RS9-RS25: (m/f), length 2 m 11101052

• RS9-RS9: (m/f), length 1 m 11101051

• RS9-RS9: (m/m), length 1 m 21250066

6.2 Interface

PG-S 16

DATA

OUT

GND

OUT

«HAND-SHAKE»